Name: Behringer EUROPOWER EP4000 Power Amplifier
SKU: 69928
Availability: InStock

Behringer EUROPOWER EP4000 Power Amplifier

$90.00

The Behringer EUROPOWER EP4000 is a professional-grade stereo power amplifier packing enough juice to rattle your bones. Designed for massive live sound reinforcement, its dual channels each pump out a thunderous 2,000W of peak power into 2-ohm loads—more than enough to drive full-size PA rigs to face-melting levels. With the Behringer EUROPOWER EP4000 amplifier, you get earth-shaking volume and pristine sonic precision.

Massive 2,000W Peak Power Delivers Thunderous Volume

Packing high-current output transistors and a beefy toroidal transformer, the Behringer EP4000 delivers up to 2,000W of peak power per channel into 2-ohm loads. Connect it to large-format speaker arrays and you’ll have all the amplification you need to fill stadiums, arenas and festival grounds with powerful, room-filling sound. The EP4000 puts out 1,400W per channel into 4 ohms as well—ideal for powering full-range mains and monitors. And running in bridge mode, it delivers a monstrous 4,000W into 4 ohms, enough for massive subwoofer arrays.

Accelerated Transient Response Ensures Punchy, Articulate Sound

Behringer’s proprietary ATR technology gives the EUROPOWER EP4000 exceptional sonic clarity and detail. By improving the amplifier’s slew rate and damping factor, ATR results in precise, punchy bass, articulate mids and shimmering highs. Snare hits snap with authority, guitar tones bite and cymbals shimmer with realistic decay. Vocals and lead instruments shine through the mix. Even at extremely high volumes, your sound stays clean and free of distortion thanks to ATR.

Low-Frequency Filters Remove Unwanted Bass

Unruly sub-bass frequencies can muddy up a mix and strain speaker cones. The EUROPOWER EP4000 lets you filter out excessive low end with adjustable high-pass filters on each channel. Set the filters anywhere from 10Hz–400Hz to remove sub-sonic rumble and tighten up low end. It’s a great way to optimize your rig for the room without compromising headroom and dynamics.

2 x 2,000 watts into 2 ohms; 2 x 1,400 watts into 4 ohms; 4,000 watts into 4 ohms (bridge mode)
Precise Power, Signal and Clip LEDs to monitor performance
XLR and 1/4″ TRS input connectors for compatibility with any source
Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems
Selectable low-frequency filters (30Hz or 50Hz) remove distracting infra-sound frequencies
Independent limiters per channel offer reliable protection against overload and distortion
High-current toroidal transformer for ultrahigh transient response and absolute reliability
Ultrareliable Toshiba/Fairchild power transistors
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
Back-to-front ventilation system, including air filter for reliable operation
“Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by Behringer Germany

Output Power

20Hz–20kHz @ 0.1% THD, both channels driven:
8 ohms per channel – 550W
4 ohms per channel – 950W
2 ohms per channel – 1,250W

RMS @ 1% THD (sine wave), bridged mode:

8 ohms – 1,750W
4 ohms – 2.400W

Peak Power, both channels driven:

8 ohms per channel – 750W
4 ohms per channel – 1,400W
2 ohms per channel – 2,000W

Peak Power, bridged mode:

8 ohms – 2,800W
4 ohms – 4,000W
Distortion: <0.02%

Frequency Response:

At 10dB below rated output Power-20Hz–20kHz
At -3dB points: 5Hz–50kHz
Damping Factor: >300 at 8Î
Noise: -100dB unweighted, 20Hz–20kHz
Voltage Gain: 40X (32dB)
Input sensitivity: 1.15V (+3.4dBu) VRMS at 8 ohms
Input impedance: 10 kohm unbalanced, 20 kohm balanced

Controls:

Front: Power switch,gain control (channels 1 and 2)
Rear: DIP switches (10x)

Indicators:

Power: Green LED
Clip: Red LED, 1 per channel
Signal: Yellow LED, 1 per channel
Inputs: Balanced XLR and 1/4″ TRS connectors
Outputs: Touch-proof binding posts and professional speaker connectors
Cooling: Continuously variable-speed fan, back-to-front airflow
Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection
Load Protection: Turn on/off muting, AC coupling
Output Circuit Type: Class H complementary linear output

Mains Voltage/Breaker: