Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.
The DriveRack 220i provides both system and microphone processing thanks to its full set of processing features and mic/line inputs. Click on the “View additional manufacturer information” link below to get the full scoop!
The DriveRack 220i provides both system and microphone processing thanks to its full set of processing features and mic/line inputs. Click on the “View additional manufacturer information” link below to get the full scoop!
- Advanced feedback suppression (AFS)
- Graphic and parametric EQ
- Compressor
- Limiter
- Auto gain control
- Noise gating
- De-esser
- Ducker
- Bandpass filters
- 2×2 matrix mixer
- 1.3 seconds of delay
- RS-232 PC GUI control
- Mic/line inputs
- Wall panel control
- Security lockout
Analog Inputs
- Number of Inputs: 2 Switchable line or mic inputs
- Connectors: Female XLR line inputs and Euroblock
- Type: Electronically balanced/RF filtered
- Impedance: >50k ohms
- Max input line level: +20dBu
- CMRR: > 40dB, typically >55db @ 1kHz
- Mic Pre gain: 30 to 60dB
- Mic EIN: < 110dB, 22Hz-22kHz, 150 ohms
Mic Phantom Power: 15v
Analog Outputs
- Number of Outputs: 2
- Connectors: Male XLR and Euroblock
- Type: Electronically balanced, RF filtered
- Impedance: 120 ohms balanced, 60 ohms unbalanced
- Max Output Level: +20dBu
A/D Performance
- Type: dbx Type IV conversion system
- Dynamic Range line: >113 dB A-weighted, >110 dB unweighted
- Type IV dynamic range: >119 dB, A-weighted, 22kHz BW >117 dB, unweighted, 22kHz BW
- Sample Rate: 48kHz
D/A Performance
- Dynamic Range: 112dB A-weighted, 109dB unweighted
System Performance
- Dynamic Range:
>110dB A-weighted, >107dB unweighted - THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain
- Frequency Response: 20Hz”20kHz, +/- 0.5dB
- Interchannel Crosstalk: >110dB, 120dB typical
- Crosstalk input to output: >780dB
- Operating Voltage: 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz
- 19″W x 1-3/4″H x 7-7/10″D
- Safety Agency Approvals: UL 6500, IEC 60065, EN 55013, E 60065
Be the first to review “dbx 220i 2X2 Loudspeaker Management System with Display”
Related products
$99.00
$98.00
Headphones
$97.00
$84.00
$91.00
Headphones
$20.74
$82.00
Live Sound
$43.47
Reviews
There are no reviews yet.