Name: RME 12Mic Dante 12-channel Network Controllable Microphone Preamp with Dante
SKU: 71361
Availability: InStock

RME 12Mic Dante 12-channel Network Controllable Microphone Preamp with Dante

$82.00

The RME 12Mic-D microphone preamp gives you 12 pristine mic preamps with complete remote control for high-end studio recording and live sound. Designed for next-generation audio networking, the 12Mic-D integrates seamlessly with Dante and MADI systems to provide maximum flexibility. With 75dB of gain and outstanding 24-bit converters, the 12Mic-D captures every nuance of your performance.

Twelve Transparent Mic Preamps

The 12Mic-D’s PAD-free mic preamps provide an incredible 75dB of gain with extremely low noise. The preamps are designed to add as little color as possible so you can capture the true character of any mic. With 12 preamps, you have enough inputs for miking a drum kit, guitar cabinet, piano and more. The first four channels also feature Hi-Z instrument inputs for direct recording of bass, guitar and keyboards.

Maximum Flexibility Through Dante and MADI

In addition to Dante, the 12Mic-D provides MADI connectivity with an optional optical module. The preamp integrates seamlessly with Dante networks, allowing you to combine analog and digital I/O channels. You can route any of the 12 analog inputs to the Dante network and up to 64 Dante channels back to the 12Mic-D. The preamp also provides ADAT I/O for integrating with your digital consoles and interfaces.

Roadworthy, Studio-Quality Design

RME designed the 12Mic-D to the highest standards for professional use. With fully redundant Dante ports the 12Mic-D keeps working even under demanding conditions. For no-compromise preamp tone that stands up to the challenges of professional recording, rely on the RME 12Mic-D.

12 high-quality mic preamps with 75dB gain range
24-bit AD conversion for pristine audio quality
Integrated Dante and MADI connectivity
Remote-controllable preamp gains and routing

Inputs

XLR In 1-12:
Input: XLR, electronically balanced
Input impedance: 3.4 kOhm
Gain range: 75dB, 1dB steps
Resolution AD: 24-bit
Frequency response @ 44.1kHz, -0.1dB: 8Hz–20.8kHz
Frequency response @ 96kHz, -0.5dB: 4Hz–29.2
Frequency response @ 19 kHz, -1dB: 3Hz – 43.7
THD @ 30dB gain: < -110dB, < 0.00032 %
THD+N @ 30dB gain: < -104dB, < 0.00063 %
Channel separation: > 110dB
Signal to Noise ratio (SNR): > 117dB RMS unweighted, > 120dB(A)
Equivalent Input Noise (EIN), 30dB Gain: 123dB RMS unweighted, 125.5dB(A) @ 150 Ohm
Maximum input level, Gain 0dB: +18dBu
Maximum input level, Gain 75dB: -57dBu
TRS In 1-4:
As above, but:
Signal to Noise ratio (SNR): 115dB RMS unweighted, 118dBA
TRS jack, balanced
Gain range: 42dB, 1dB steps
Maximum input level, Gain 8dB: +20dBu
Maximum input level, Gain 50dB: -22dBu
Switchable high impedance (unbalanced TS): 1 MOhm

DANTE:

2 x RJ45 for Dante network connectivity (up to 64 channels)

MADI:

Coaxial via BNC, 75 Ohm, according to AES10-1991
Optical via optional SFP module
62.5/125 and 50/125 compatible
Accepts 56 channel and 64 channel mode, plus 96k Frame
Single Speed: up to 64 channels 24-bit/48kHz
Double Speed: up to 32 channels 24-bit/96kHz
Quad Speed: up to 16 channels 24-bit/192kHz

Word Clock:

75 ohm Word Clock BNC connectivity
Support 44.1kHz –192kHz
Support full or single speed operation
Intelligent Clock Control switches clock source seamlessly

ADAT:

3 x TOSLINK
Quad Speed (S/MUX4): 1 x 2 channels 24-bit/192kHz

Outputs

Phones 1/2:
Resolution: 24-bit
Noise (DR): 115dB RMS unweighted, 118dBA
Frequency response @ 44.1kHz, -0.5dB: 9Hz–22kHz
Frequency response @ 96kHz, -0.5dB: 9Hz–45kHz
Frequency response @ 192kHz, -1dB: 8Hz–75kHz
THD+N: < -100dB, < 0.001 %
Channel separation: > 110dB
Output: 6.3 mm TRS stereo (unbalanced) or mono (balanced) jack
Maximum output level at 0dBFS: +13dBu (unbalanced), +19dBu (balanced)

DANTE:

2 x RJ45 for Dante network connectivity (up to 64 channels)

MADI:

Coaxial via BNC, 75 Ohm, according to AES10-1991
Optical via optional SFP module
62.5/125 and 50/125 compatible
Accepts 56 channel and 64 channel mode, plus 96k Frame
Single Speed: up to 64 channels 24-bit/48kHz
Double Speed: up to 32 channels 24-bit/96kHz
Quad Speed: up to 16 channels 24-bit/192kHz

Word Clock:

75 ohm Word Clock BNC connectivity
Support 44.1kHz–192kHz
Support full or single speed operation
Intelligent Clock Control switches clock source seamlessly

General

2x RJ45 for Dante network connectivity
Single Speed: up to 64 channels 24-bit/48kHz
Double Speed: up to 32 channels 24-bit/96kHz
Quad Speed: up to 16 channels 24bit/192kHz
MADI input redundancy (requires optional SFP module)
Internal routing of up to 268×282 channels
19” enclosure 1 unit height
1,54” full color display with control knob and four buttons for convenient, direct access to all features
Remote control via HTTP & JSON
internal PSU, optional 12V DC redundant power supply
USB 2.0 (for remote control and firmware updates)
DC-coupled outputs